TVS Spigots


  • Short Spigot fitting design, makes it easy to place it closer to the bottom of the Primary.
  • Small body makes it easy to clean and takes less space than regular spigot.
  • Spout is barbed for securely attachment to hose.
  • When you open and close the valve the hose does not turn.
  • BPA Free.

Maximum Temperature: 65 °C (150 °F).


Three options available:
  • Mini Spigot: fits standard 5/16" hose. Requires a 3/4" hole. Comes assembled with O-ring and nut.
  • Fast Flow Spigot: fits standard 1/2" hose. Requires a 1" hole. Comes assembled with two O-rings and nut.
  • Regular Spigot: fits standard 5/16"and 7/16" hose. Requires a 1" hole. Comes assembled with two O-rings and nut.

Tips about spigots:
  • Run hose end under hot water before attaching to Spigot fitting.
  • When attaching TVS Spigot to Primary, do not over tight the nut. Hand tight should be enough. If you apply too much pressure, you may damage the O-ring.
  • Do not apply excessive pressure to the spout when attaching or removing hoses.

The following parts are available:
O Ring

Replacement Seal for the Spigot/Drum Tap, TVS Spigots

Spigot-Nut

Replacement Nut for the Spigot/Drum Tap, TVS Spigots

Note: we do not sell our products directly.

If your local retailer does not carry our products, feel free to e-mail us so we can direct you to the nearest retailer.
If you are a retailer, please let your preferred wholesaler know about your needs.